1. PROBE AND PROBE COVER
2. MOISSANITE INDICATOR
3. ADJUSTMENT KNOB
4. TESTING/ BATTERY OK INDICATOR
5.
BATTERY COMPARTMENT/ COVER
6. TEST BUTTON
MT2 MOISSANITE TERMINATOR IS USED TO IDENTITY ARTIFICIAL MOISSANITE GEM STONES AND OTHER MAN MADE SYNTHETIC GEM STONES.
NO OTHER INSTRUMENT OR TESTER IS REQUIRED TO IDENTIFY MOISSANITE GEM STONES.
MOISSANITE TESTING INSTRUCTIONS
1. SET THE ADJUSTMENT KNOB TO THE RIGHT (LARGE STONE SETTING) #3.
2. REMOVE PROTECTIVE
END CAP, #1.
3. WITH YOUR THUMB PRESS THE PRESS AND HOLD BUTTON, #6 WHILE YOUR FINGERS TOUCH THE REAR METAL PLATE.
4.
THE YELLOW TESTING LIGHT #4 SHOULD LIGHT AND MUST STAY ON DURING ALL TESTING.
5. WITH YOUR OTHER HAND HOLD THE METAL PART
OF THE RING OR ANY SOLID METAL PART CONTAINING THE GEM STONE. WHEN USING THE LOOSE STONE HOLDER YOUR OTHER HAND MUST HOLD
THE LOOSE STONE HOLDER.
6. PLACE THE TESTER PROBE IN THE CENTER OF THE GEM STONE TO BE TESTED WITHOUT TOUCHING THE TESTER
PROBE TO ANY METAL SURFACE. DO THIS IN A MANOR THAT THE METAL PART OF THE TESTING PROBE IS AS FAR AWAY AS POSSIBLE FROM ANY
METAL FINDINGS OR GEM HOLDING DEVICE. BECAUSE MOISSANITE GEM STONES ARE INCONSISTENT, FOR BEST RESULTS BE SURE TO TOUCH 3
OR 4 POINTS AROUND THE CENTER OF THE GEM STONE.
7. IF A MOISSANITE GEM STONE IS BEING TESTED YOU WILL HEAR A DISCONTINUOUS
BEEP AND SEE A FLASHING GREEN LIGHT, #2
8. REAL GEMSTONES WILL NOT INDICATE WHEN USING THE MT2 TESTER. IN ORDER TO IDENTIFY
NATURAL DIAMONDS A THERMAL DIAMOND TESTER SUCH AS THE R S MIZAR "PRESTIGE SERIES II" MUST BE USED
9. USE THE SMALL STONE
SETTING ONLY WHEN TESTING SMALL STONES, APPROXIMATELY 3.5 MM OR SMALLER, OR WHEN YOU CANNOT KEEP THE PROBE A TENTH OF AN INCH
FROM THE METAL PRONGS OR SURFACE.
NOTE: TO TEST UNMOUNTED STONE PLACE STONE IN LOOSE STONE HOLDER. ALWAYS HOLD THE LOOSE STONE HOLDER WITH YOUR FREE HAND.
HELPFUL HINTS
· ALWAYS MAKE SURE THAT THE GEM STONE TO BE TESTED IS DRY AND CLEAN.
· THE ONLY ERROR WHICH CAN BE MADE IS GETTING TO
CLOSE TO THE METAL SURFACE. WHEN THIS HAPPENS A SMALL BLUE GLOW CAN USUALLY BE OBSERVED FROM THE PROBE TO THE METAL. IF THIS
HAPPENS A MOISSANITE INDICATION WILL BE SEEN & HEARD. KEEP THE PROBE AWAY FROM THE METAL SURFACES.
· IT IS BEST TO
TEST IN A CIRCULAR MOTION AROUND THE CENTER OF THE GEMSTONE. SEVERAL POINTS ON THE STONE SHOULD ALWAYS BE CHECKED.
· THE
YELLOW TESTING LIGHT MUST REMAIN ON DURING ALL TESTING. IF IT DOESN'T THE BATTERY NEEDS REPLACING. A 9 VOLT TYPE NEDA SIZE
1604 (006P)
· TO IDENTIFY MOISSANITE GEM STONES AND OTHER MAN MADE SIMULANTS ONLY THE "MT-2" TESTER IS REQUIRED
· NO
INDICATION WILL BE SEEN OR HEARD WHEN USING THE "MT-2" TESTER ON ANY NATURAL GEM STONES.
· A FUNCTION TEST CAN BE DONE
BY SIMPLY TOUCHING YOUR FREE HAND TO THE TESTER PROBE. MOISSANITE WILL BE INDICATED.
WARRANTY
O.N.E. PROVIDES THAT EACH
MOISSANITE TESTER WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE
(BATTERY NOT INCLUDE IN WARRANTY). THIS WARRANTY WILL BECOME VOID BY:
· UNAUTHORIZED REPAIR, MISUSED, MODIFICATION, OR
ALTERATION,
· ACCIDENTAL DAMAGE, NEGLECT OR IMPROPER USE.
O.N.E. SHALL NOT BE HELD LEGALLY LIABLE OR RESPONSIBLE
FOR ANY ERROR IN DISPLAY INDICATION OR INTERPRETATION THEREOF IN THE IDENTIFICATION OF ANY STONES, MINERALS, GEMS, OR GEMSTONES
BY THE MOISSANITE TESTER.
WARRANTY SERVICE
SHOULD THIS TESTER REQUIRE WARRANTY SERVICE YOU MUST CALL OR WRITE O.N.E.
FOR A RETURN MATERIAL AUTHORIZATION [R.M.A.] BEFORE RETURNING IT FOR REPAIR. ALL RETURNS MUST BE ACCOMPANIED BY A COPY OF
THE ORIGINAL SALES RECEIPT. ANY RETURNS WITHOUT THE R.M.A. NUMBER ON THE OUTSIDE OF THE PACKAGE WILL NOT BE ACCEPTED AND WILL
BE RETURNED TO SENDER.
Oris Nelson Enterprise, Inc.
